Shopping for an air conditioning system can be a process for the typical homeowner with all the types and options available. In order to keep your sanity (and your cash ), it’s helpful to have some guidelines available in order to narrow down the choices to just the ones that meet your needs. Here are some guidelines to help you decide the best options for you. I can list then by least expensive to most expensive.

Portable Air Conditioners

Portable air conditioners are a terrific utility appliance to have in any house. They are ideal for providing spot cooling for smaller rooms or areas on an’as needed’ basis. So that you will require access to make this occur you will need to channel the heat to the exterior via the duct. Condensation can also be gathered inside of the unit and has to be emptied after each use or when it fills up. You should view them as an appliance like your vacuum cleaner that will be pulled out when required and put away when not in use when considering air conditioners. Then this is most likely not the best solution for your application if you envision yourself using this appliance on a continuous basis in a predetermined place. Here are some features that you should consider Should You decide to move forward with the portable choice:

Get the highest BTU rating which you can afford.

  • Find a unit with an automated shut-off once the condensation reservoir fills up.
  • Look for units which come equipped with a washable air filter. This will cut back on your maintenance expenses.
  • Other choices like timers, oscillators, wheels, etc. are a matter of personal taste and budget.

Window Mounted Air Conditioners

Window components are a good solution for heating individual rooms inside your house and therefore are used as the principal cooling solution in the majority of the northern US where high temperatures are limited to about three months out of this year. The average homeowner can installs window components without the aide of an air conditioning professional. It is uncommon to see units that are removed an stored away during the none summer months although they’re not intended to be permanent fixtures. The downside to this window is that they create a lot of noise, both outside and inside. Then you will need units if you need to cool more than one room. Here are a Couple of factors if you are shopping for window components:

  • Highest BTU rating that you could afford.
  • A sturdy window/window framework to support the weight of this device.

Condensation drips from the back of the unit. Be sure that it isn’t going to land somewhere that will cause a health hazard for pets and kids.

You will require a 3-prong socket within close proximity of your own window to give power to the unit.

Is the filter accessible from the front of the unit? This is especially important for 2nd story software.

Mini-Split -orDuctless Air Conditioners

This is a 2-piece cooling solution that does about the exact same job as window components but doesn’t call for a window and is quite quiet. There is A hole punched in the exterior wall of your home to supply air. Copper tubing connects the condenser that’s set up on a slab beyond your home and the fan unit. Ductless systems that I’ve installed are the result of never having a window available where the heating system was required, or that the noise generated by a window unit wasn’t acceptable. If this sounds like you, then here are some things you Should Think about before selecting the unit:

The device should be sized by an expert depending on the square footage of the area to be cooled as well as the climate. Other considerations like shading and orientation of the exterior walls play into the calculation.

Look for a washable air filter to reduce your maintenance cost.

R-22 Freon is being phased out, therefore only consider a PURON-based alternative. Split System Central Air Conditioners Split system central air conditioning is the alternative in locations or in the US. There are 3 elements to a split system solution: The compressor that is mounted on a slab outside of your home, the condenser and the blower/heater that are installed in-line with your ductwork. The ductwork services every one the rooms inside your home and the blower doubles as a heater to the winter seasons that are short. The air filtered through a return and is recirculated within your home. If your house was not designed to support a central heating and air conditioning solution, then attempting to retrofit one can be quite pricey. Routing the ductwork can be tricky if not impossible in some cases for houses not originally designed to allow for it. If you are currently considering a new heating and air conditioning solution, then you should consider the following:

Do not use the dimensions of your previous unit to determine the size needed for a replacement device. The vast majority of systems are over-sized for reasons that will be discussed in another article. Installing a unit that is too large will result in higher energy intake and less condensation removal. Have a professional dimension your system based on Manual”J” criteria. If your air conditioning professional Doesn’t know what this is, then run away quickly (-;

Consider replacing your ducts at the same time. Ductwork contains mold and other health hazards. New ductwork will offer you better efficiency and a healthier living environment. Waterloo Air Conditioning & Furnace Repair and Installation

Contemplate only Puron-based systems since freon (R22) aluminum is being phased out.

Weigh the price of systems with a SEER rating of 16 or higher against people that have a lower SEER rating to determine the Energy Tax Credit offered by the EPA will do the job for you.

When you have health problems, then you might want to look into electronic air cleaners and UV lights as additional low-cost accessories that can be installed in-line for cleaner air. kitchener air conditioning installation

Package System Air Conditioners

A package system is one unit solution which has all the components that are found in a split platform alternative inside a single unit. There is most package system in workplace buildings mounted on the roof. There are a few home applications in largely high-end houses where the units are hidden from the plain sight in order to not disrupt the landscaping. The other main difference between a package system versus a busted system is warmth exhaust is pumped out and that air is channeled in from the outside. Because of this, package solutions are significantly less energy efficient than split systems. Visit us by clicking here

You have precisely the same concerns when looking at a bundle solution as you do with a split system. The sole distinction is that the SEER rating condition is 14 rather than 16.

Hopefully, we have given you some information that will help to narrow down the seemingly infinite alternatives which are available for the ac needs.